A light in the wardrobe when the door opens, a shelf that lights with a touch, a soft light under the bed at night. Describe them in words, try them in the simulator and build them on an ESP32 board, without writing code.
Start with your work →Free, in the browser: try it in the simulator first, then buy only the parts it needs.
A magnetic contact on the door turns the LED strip on.
Parts: Magnetic door contact, MOSFET driver, 12 V LED strip
The request it sends: «When the wardrobe door opens, the magnetic contact turns the 12 V LED strip on; when it closes, off»
Build it in the IDE →Touch the wood: the light comes on, touch again and it goes off.
Parts: Touch sensor, WS2812 LED strip
The request it sends: «A touch sensor under the shelf: one touch turns the LED strip on in warm white, another turns it off»
Build it in the IDE →You get up in the dark: a low, soft light, only when needed.
Parts: Motion sensor, Light sensor, WS2812 LED strip
The request it sends: «At night, when the motion sensor feels someone and the room is dark, softly turn on the LED strip under the bed in dim orange for 30 seconds»
Build it in the IDE →Write what you need in your own words: the assistant proposes the project and tells you if something cannot be done.
Start with your work →